Should i upgrade bios

If so, how to perform a BIOS update in a safe way? When you power on your computer, BIOS is the first software to run, initializing your system hardware components, and preparing your computer to boot. Actually no. But what on earth is the update for? To make sure the update suits what you need, you can check the changelog for the BIOS update.

Each manufacturer has its own instructions for updating a BIOS. Note down the system serial number also referred as service tag , which is an alphanumeric character code you may need later on. Then it will display the available BIOS version for you. MBA, for example. The BIOS flashing process varies by manufacturer. Therefore, for safety concerns, you can check the updating details of each BIOS manufacturer. Each BIOS has a different way of accessing the update tool.

If you choose the option, it should allow you to select the firmware file from the USB drive. After doing all the appropriate confirmations, the flashing process should complete.

Some motherboard models have multiple hardware revisions. Whether by a power cut or you pushing the reset button. We have never experienced a bricked board or failed flash ourselves, but they do happen and it can be a real pain to fix. The good news is that, one way or another, the flash should be over in a few seconds. Sydney Butler is a social scientist and technology fanatic who tries to understand how people and technology coexist.

He has two decades of experience as a freelance computer technician and more than a decade as a technologies researcher and instructor. Sydney has been a professional technology writer for more than five years and covers topics such as VR, Gaming, Cyber security and Transhumanism. Read Sydney's Full Bio.

We hate spam too, unsubscribe at any time. Table of Contents. Subscribe on YouTube! Once you've found the Support page, there should be a section for downloads or drivers.

Download the latest one and check the instructions it came with. You'll generally have to go through one of two processes. On many PCs especially older ones , you'll need to format a flash drive, copy the new BIOS file to it, and reboot your computer, pressing a key to enter the BIOS setup usually Delete, F2, or some other key you'll see on-screen at boot. Once inside the BIOS, make note of any settings you've changed in the past, since an update will usually revert your system to the default settings.

Take photos of each category if you need to! Then, look for the option to update your firmware, and you'll be able to run the update utility using the file on your flash drive. Again, be very careful not to interrupt the process or turn off your PC during this time, or you could render your PC unusable. This makes it far easier to update, since you don't have to enter the BIOS setup before running the update.